Accessories
We have a wide array of cabinet accessories to choose from Rev-A-Shelf. If you do not see something you would like, be sure to ask!
Pull-out Accessories
Trash Pull-out (BWBB)
- Wastebasket rests in a natural finish wood frame
- Wastebasket pull-out features heavy duty, 132 lb rated glides
- BWBB15 CC features one silver plastic 35-quart capacity bin
- BWBB15-2 CC features two silver plastic 27-quart capacity bins
- BWBB18-2 CC features two silver plastic 35-quart capacity bins
- Decorative hardware strongly recommended
Roll Out Shelves (DROT)
- Natural finish dovetail drawer with captured wood bottom
- Includes CushionCLose glides
- Deep Roll Out Trays are not adjustable
- Roll outs meet KCMA load standards of 15 pounds per square foot
Base Pot & Pan Organizer (BPPO)
- Organizer features natural solid wood, wood veneer and dovetail (front only) construction with wood captured bottom
- Top shelf of organizer measures 6-3/16″ deep
- Middle shelf of organizer measures 9-3/4″ deep
Base Pantry Pull-out (BPP)
- Full-height door
- Features three individual heavy-duty glides
- One fixed and three adjustable shelves with chrome rails
Utensil Storage Pull-out (BPPUS)
- Full-height door
- Features heavy-duty glides
- One fixed and one adjustable lower shelf in a natural finish with chrome rails
- One fixed upper shelf in a natural finish with chrome rails and three stainless steel removable storage bins
- Stainless steel bins measure 5-1/4″ wide x 6-7/8″ deep
Tray Divider Pull-out (BTDP)
- Full-height door
- Features heavy-duty glides
- Tray divider is adjustable to accommodate various storage solutions
Cleaning Caddy Pull-out (CCPO)
- Field installation accessory
- Features metal and wire CushionClose pull-out organizer with two 1L spray bottles and one removable gray cleaning caddy
- Supports up to 75 pounds
- Unit is configurable so that spray bottles can be installed at the front or back
- For use with 15” or wider base cabinet
- Mounts to cabinet floor
- Available with Reduced Depth Option RD-23 through RD-21
Blind Base Pull-out (BLBPO)
- Full-height door
- Blind base door is installed in the left section
- Door and Pull Out Kit can be reversed in the field as blind sections are identical
- Includes 1/8″ panel to cover blind opening (field trim and install)
- Refer to the Blind Corner Base Installation Chart for specifications
Pull out kit:
Features two-tiered organizer with four chrome finish wire shelves and engineered wood bottoms with woodgrain look
Features full-extension 100-pound rated glides
- Packaged separately for field installation
- Mounts to cabinet floor
- Unit requires 19-1/4” of clearance to pull the unit out, and 12-1/2” of clearance to slide the unit over
- Baskets are able to be repositioned to allow clearance of deeper adjacent objects up to 26″
Blind Base Swing Out (BLBSO)
- Full-height door
- Features Furniture Ends standard
- Blind base door is installed in the left section
- Door can be reversed in the field as blind sections are identical, kit is not reversible and must be ordered as left or right
- Includes 1/8″ panel to cover blind opening (field trim and install)
- Refer to the Blind Corner Base Installation Chart for specifications
Pull out kit:
Must be ordered left or right
- Features two-tiered organizer with two chrome finish wire shelves and engineered wood bottoms with
woodgrain look - Supports up to 45 pounds per shelf
- Packaged separately for field installation
- Mounts to cabinet side panel and telescopic pole (included)
Base Mixer Liftt (MLK)
- Full-height door
- Features Furniture Ends standard
- Includes 1-3/8” thick natural finish solid wood shelf and one pair of shock dampening, adjustable tension lifts
- Supports up to 60 pounds
- Cannot be used with Deep Roll Out Tray or adjustable shelf
- Kit packaged separately for field installation
Base Wood Roll-out Tray Divder (ROTD)
- Full-height door
- Features Furniture Ends standard
- Includes 1-3/8” thick natural finish solid wood shelf and one pair of shock dampening, adjustable tension lifts
- Supports up to 60 pounds
- Cannot be used with Deep Roll Out Tray or adjustable shelf
- Kit packaged separately for field installation
Sliding Towel Bar (STB)
- Field installation accessory
- Two chrome finish towel bars
- Mounts to cabinet side panel
- Pulls out 7″ for easy access
- For use in 24″ deep cabinets or cabinets with RD-23 through RD-14
Base Filler Pull-out (BFPO
- Must be installed between two base cabinets behind the face frames in 3″ (BFP3 CC) or 6″ (BFP6 CC) of floor space
- Cannot be installed next to an appliance or at the end of a run
- No side panels or toe kick
- Filler shipped unattached for field installation
- An overlay filler is recommended for full overlay door styles (order separately)
- Two fixed and two adjustable wood shelves with chrome rails
1 /
1
Door & Drawer Accessories
Cutlery Divider Insert (CDI)
- Available as factory installed for all door styles
- Solid hardwood and plywood in natural finish
- Not sized to fit cabinets with Reduced Depth Option
- Number of sections and overall width:
- CDAK15 – 3 sections- 9-3/4″
- CDAK18 – 4 sections- 12-3/4″
- CDAK21 – 5 sections- 15-3/4″
- CDAK24 – 5 sections- 18-3/4″
- CDAK30 – 6 sections- 24-3/4″
- CDAK36 – 7 sections- 30-3/4″
Wood Tiered Cutlery Divider (WTCD)
- Available as factory installed for all door styles
- Field installed accessory replaces existing drawer box
- Glides are NOT included: reuse existing drawer glides
- Solid hardwood and plywood in natural finish
- Double-tiered cutlery divider slides independently from drawer
- Can be installed in cabinets with single drawer or side-by-side drawer configurations
- Not sized to fit cabinets with Reduced Depth Option
- Number of upper & lower sections, number of cooking utensil sized sections
- WTCDAK15 – 5 – 5 – 0
- WTCDAK18 – 5 – 6 – 0
- WTCDAK21 – 6 – 7 – 0
- WTCDAK24 – 7 – 7 – 0
- WTCDAK30 – 5 – 5 – 4
- WTCDAK36 – 5 – 5 – 5
Knife Block Drawer Insert (KBDI)
- Field installation accessory
- Solid hardwood in natural finish
- Features knife slots with hilt rest for easy knife removal
- Not sized to fit cabinets with Reduced Depth Option
- Number of knife Slots & overall width
- KBDIK15 – 10 – 9-3/4″
- KBDIK18 – 13 -12-3/4″
- KBDIK21 – 16 -15-3/4″
- KBDIK15 – 19 -18-3/4″
Spice Drawer Insert (SDI)
- Available as factory installed for all door styles
- Solid hardwood and plywood in natural finish
- Accommodates most spice containers (not included)
- Not sized to fit cabinets with Reduced Depth Option
- Overall width
- SDIAK15 – 9-3/4″
- SDIAK18 – 12-3/4″
- SDIAK21 – 15-3/4″
- SDIAK24 – 18-3/4″
Adjustable Drawer Divider Insert (ADDI)
- For use in large drawers only
- Can be field trimmed in width and depth to
accommodate 21″ – 36″ wide drawers and cabinets with the Reduced Depth Option - Kit includes:
- Front and back panels with grooves
- Vertical dividers – two are grooved to accept horizontal dividers
- Horizontal dividers
- Installation screws
Peg Dish Organizer Insert (PDO)
- Used in base cabinet with two large drawers
- Drawer body measures 6-15/16″ deep
- One Peg Dish Organizer Kit (organizer and adjustable pegs) in natural finish, packaged separately for field installation
- Additional pegs (PEG KIT 4 PK) and Peg Dish Organizer Kits (PDO_) can be ordered separately
- Drawers feature Full-Extension CushionClose heavy-duty 132 pound rated glides
Door Mounted Spice Rack (SR)
- Spice Rack Kit packaged separately for field installation
- Position adjustable shelves prior to installation
- Kit in natural finish solid wood features chrome rails and three fixed shelves
- Must be ordered as hinged left or right
Cabinet Tray Divider (TD3)
- Field installation accessory
- Chrome finish
- For use in 24″ deep cabinets or cabinets with RD-23 through RD-14
- Mounting hardware included
1 /
1
Sink Base Accessories
Sink Base Mat (SBM)
- Field installation accessory
- Designed to funnel any leaks or spills out the front of the cabinet while protecting the cabinet floor
- Features flexible material in gray finish – easily trimmable
- Not sized to fit cabinets with Reduced Depth Option
- SBMAT39 is notched for center stile
Stainless Tilt-out Tray (STO)
- Field installation accessory
- Kit features tray and one pair of scissor hinges
- Order units individually
- STO TRAY 11:
- Order one unit for SB18
- STO TRAY 14:
- Order one unit for SB21, SB24, SB27 or CSF42
- Order two units for SB39, SB42 or SB48
- STO TRAY 22:
- Order one unit for SB30, SB33 or SB36
- Sink front units match sink base sizes as noted above
- Tilt-Out Trays are NOT dishwasher safe
Sink Base Door Storage Unit (SBDSU)
- Field installation accessory
- Solid hardwood in natural finish
- Two fixed shelves
- Cannot be used with Deep Roll Out Trays
- Full-depth shelf must be field trimmed to half-depth if installed in standard cabinet
- Removable white plastic tray is NOT dishwasher safe
- SBDSU15 mounts to 15″ or 16″ wide base door
- SBDSU18 mounts to 18″ or 19″ wide base door
- Not sized to fit Deep Sink Base (DSB) cabinet doors
Sink Base Multi-Storage Shelf (SBMSS)
- Field installation accessory
- 3/4″ plywood with natural finish
- Invert for left or right installation