Our Cabinet Accessories
All Wood Cabinet Distributor Since 2008
Pullout Accessories
Door & Drawer Accessories
Sink Accessories
Trash Pull-out (BWBB)
- Wastebasket rests in a natural finish wood frame
- Wastebasket pull-out features heavy duty, 132 lb rated glides
- BWBB15 CC features one silver plastic 35-quart capacity bin
- BWBB15-2 CC features two silver plastic 27-quart capacity bins
- BWBB18-2 CC features two silver plastic 35-quart capacity bins
- Decorative hardware strongly recommended
Rollout Shelves (DROT)
- Natural finish dovetail drawer with captured wood bottom
- Includes CushionCLose glides
- Deep Roll Out Trays are not adjustable
- Rollouts meet KCMA load standards of 15 pounds per square foot
Base Pot & Pan Organizer (BPPO)
- Organizer features natural solid wood, wood veneer and dovetail (front only) construction with wood captured bottom
- Top shelf of organizer measures 6-3/16″ deep
- Middle shelf of organizer measures 9-3/4″ deep
Base Pantry Pullout (BPP)
- Full-height door
- Features three individual heavy-duty glides
- One fixed and three adjustable shelves with chrome rails
- decorative hardware strongly recommended
- BPP9 not available with Recessed Toe Kick Both Option (RTKB)
Utensil Storage Pullout (BPPUS)
- Full-height door
- Features heavy-duty glides
- One fixed and one adjustable lower shelf in a natural finish with chrome rails
- One fixed upper shelf in a natural finish with chrome rails and three stainless steel removable storage bins
- Stainless steel bins measure 5-1/4″ wide x 6-7/8″ deep
- decorative hardware strongly recommended
- BPPUS9 not available with Recessed Toe Kick Both Option (RTKB)
Base Filler Pullout (BFPO)
- Must be installed between two base cabinets behind the face frames in 3″ (BFP3 CC) or 6″ (BFP6 CC) of floor space
- Cannot be installed next to an appliance or at the end of a run
- No side panels or toe kick
- Filler shipped unattached for field installation
- An overlay filler is recommended for full overlay door styles (order separately)
- Two fixed and two adjustable wood shelves with chrome rails
Tray Divider Pullout (BTDP)
- Full-height door
- Features heavy-duty glides
- Tray divider is adjustable to accommodate various storage solutions
- decorative hardware strongly recommended
- BTDP9 not available with Recessed Toe Kick Both Option (RTKB)
Base Wood Roll-out Tray Divider (ROTD)
- Rollout Tray Divider in natural finish solid wood, wood veneer, and dovetail (front only) construction with engineered wood bottom.
- B12 CCROTD features two compartments (one partition)
- B15 CCROTD features tree compartments (two partitions)
- Partitions are field installed
- No shelf
- Hinged left and can be reversed in the field
Cleaning Caddy Pullout (CCPO)
- Field installation accessory
- Features metal and wire CushionClose pull-out organizer with two 1L spray bottles and one removable gray cleaning caddy
- Supports up to 75 pounds
- Unit is configurable so that spray bottles can be installed at the front or back
- For use with 15” or wider base cabinet
- Mounts to cabinet floor
- Available with Reduced Depth Option RD-23 through RD-21
Base Blind Pullout (BLBPO)
- Full-height door
- Blind base door is installed in the left section
- Door and Pull Out Kit can be reversed in the field as blind sections are identical
- Includes 1/8″ panel to cover blind opening (field trim and install)
- Refer to the Blind Corner Base Installation Chart for specifications
Pull out kit:
Features two-tiered organizer with four chrome finish wire shelves and engineered wood bottoms with woodgrain look
Features full-extension 100-pound rated glides
- Packaged separately for field installation
- Mounts to cabinet floor
- Unit requires 19-1/4” of clearance to pull the unit out, and 12-1/2” of clearance to slide the unit over
- Baskets are able to be repositioned to allow clearance of deeper adjacent objects up to 26″
Blind Base Swing Out (BLBSO)
- Full-height door
- Features Furniture Ends standard
- Blind base door is installed in the left section
- Door can be reversed in the field as blind sections are identical, kit is not reversible and must be ordered as left or right
- Includes 1/8″ panel to cover blind opening (field trim and install)
- Refer to the Blind Corner Base Installation Chart for specifications
Pull out kit:
Must be ordered left or right
- Features two-tiered organizer with two chrome finish wire shelves and engineered wood bottoms with
woodgrain look - Supports up to 45 pounds per shelf
- Packaged separately for field installation
- Mounts to cabinet side panel and telescopic pole (included)
Base Mixer Lift (MLK)
- Full-height door
- Features Furniture Ends standard
- Includes 1-3/8” thick natural finish solid wood shelf and one pair of shock dampening, adjustable tension lifts
- Supports up to 60 pounds
- Cannot be used with Deep Roll Out Tray or adjustable shelf
- Kit packaged separately for field installation
We recently remodeled our entire home, and we wanted "the perfect cabinets" for our new kitchen. We were exceptionally happy with the cabinet quality, value, the delivery process. We would recommend Cape Cabinet Depot to anyone looking for beautiful, quality, affordable cabinets.
QUICK TOOLS